Wonderglas GC (GC = gel coated surface) is a UV-protected GRP (Glass reinforced poly) sheeting product. Chemically cross-bonded, the gel coating is 100 micron thick and is integrated with the sheet. This prevents delamination. The sheet's gel-coated surface acts as an invisible barrier, reducing surface erosion and light transmission losses to a negligible extent.
Hail Resistant
Stable Light Transmission
Coating with UV Stable 100 Micron Gel
Reduces UV Transmission by 99%
Low Surface Erosion
Chemical Resistant
SL, SR76 Retardent
Ampelite's Industrial Fibreglass (glass reinforced polyester), which has low thermal expansion, allows for individual lengths of up to 12.2m. All current profiles, including Trimdek (5-Rib), 700 decking, and Corrugated are available. Plus, most of the superseded profiles can be found. All Ampelite fiberglass sheets sold in Australia are made in Australia. Ampelite warrant series 2400 (and higher) standard-grade industrial fibreglass sheeting against hail up to 20mm diameter and winds up to 100 km/hr.
Multiple supursed metal profiles
Blocks 99.9% of UV
Coated with a UV Stable 100 Micron Gel
Commercial & industrial Skylights
Webglas GC (GC = Gel Coated Surface) sheets weigh 3660g per square metre and are combined with a reinforced heavy gauge, woven glass mat. Webglas GC is so strong that no safety mesh is required. This is especially important in corrosive and aggressive environments, which can quickly damage metal. Webglas GC complies without restriction with all requirements of Class 2 through Class 9 buildings of Australia's Building Code.
Transparent or opaque colored panels
Corrosion resistantance
Strongest FRP building panels
Superior UV protection
Cost savings for the life cycle
Maintenance-free, long life
Blocks 99.9 percent of UV rays
Cool-lite GC Skylights diffuse light with low heat transmission. Heat reduction sheeting can be beneficial in a number of buildings, including factories, warehouses, shopping centers, schools, gyms and sports stadiums. Cool-lite GC can provide natural, diffused lighting that can supplement or replace energy-hungry electric illumination in single-level buildings. Cool-lite GC reduces transmitted temperatures and glare, and improves air conditioning efficiency.
There are no restrictions on width or profile
Heat transmission is reduced
Natural diffused light
Reduces energy costs
FS FireCheck, a ground-breaking fire-resisting roofing product and cladding product, is now available. The FS FireCheck is an intumescent-impregnated glass tissue that is made within Ampelite sheets. FS FireCheck is free of the harmful Bromine fire retardant chemical and far surpasses any fibreglass sheeting fire retardant type. FS FireCheck now has its own fireproofing protection. FS FireCheck can resist burning for up to 30 minutes. All roofing profiles are available and all Ampelite premium fibreglass products are covered.
Fire Resistant
Does Not Contain Bromine
UV Exposure Does Not Cause Browning
Qualities that are Non Toxic to Burn
Hail Resistant
Stable Light Transmission
Coating with UV Stable 100 Micron Gel
Reduces UV Transmission by 99%
No Surface Erosion
Chemical Resistant Resin can be used to make this product
.webp)
ClearSlide GC's unique profile fibreglass-sheet clip system makes installation faster and easier. ClearSlideGC allows you to combine metal roll form decking with fibreglass skylighting for long lengths. ClearSlide roofs are watertight and visually appealing. The ClearSlide clip system "floats", the fibreglass above the steel deck, so expansion and contraction are not dependent on each other. The side ribs of the metal decking are not perforated. The Ampelite ClearSlide decking, a special-purpose version of Wonderglas GC sheeting, has all the superior features.
Light transmission is maintained
High resistance to yellowing & discolouration
Surface erosion (fibre show) is eliminated
Low surface erosion
The building will be cost-effective over its life
Ampelite's Dual Roof system can provide natural light in your workplace or recreational areas at a fraction the cost of double glazing. The system diffuses natural light evenly and eliminates condensation. It also reduces the transmission of heat.
Eliminates condensation
You can save a lot of energy
It is cost-effective
ClearSlide or Webglas GC can be combined to allow for longer sheets
Thermal insulation that works
Ampelite Energy Efficient Factory Assembled skylight (EEFAS), has been designed to complement all insulated steel panels produced by different sandwich panel manufacturers. The EEFAS system has excellent thermal insulation and conforms to the Building Code of Australia's (BCA) requirements for Class 2, 3, and 9 Buildings. EEFAS comes preassembled with the best quality components. The Ampelite EEFAS system is a sandwich panel alternative that offers exceptional spanning and single-fixing.
Thermal Skylight has excellent insulation properties and conforms to the Building Code of Australia's (BCA), requirements for Class 2-9 Buildings, Part J. The thermal skylight can be installed easily on-site and is not limited by the roof length or sheet profile. The thermal skylight can be used with any roofing profile and insulation thickness. The Thermal Skylight is energy efficient and provides natural light without compromise. The Thermal Skylight allows for design flexibility and adaptability in your industrial or commercial building.
Ampelite SR76 Smoke-Reduced sheeting can be made to include all the benefits of Wonderglas GC gel coating and Cool-Lite GC heating reduction sheeting. The SR76 sheet is compliant with AS1530.3 2006 and contains the finest resins.
