Metroll Wall Cladding

Metroll Corodek®

Corodek® is high tensile steel, corrugated roofing and wall cladding manufactured from 0.35mm*, 0.42mm and 0.48mm BMT COLORBOND® steel and ZINCALUME® steel or galvanised steel. Corodek® can be custom cut and comes in a range of COLORBOND® steel colours. Visit the Resources page to download the Cyclonic Design Manual for Corodek®.

• Suitable for roofing & walling

• Elegant, traditional appearance

• High tensile steel

• Long lengths

• COLORBOND® steel colour range

Metroll Trimclad®

Requiring only a minimum pitch of 2 degrees Trimclad® roofing and walling is a preferred choice for commercial and industrial uses.It is manufactured from 0.35mm, 0.42mm and 0.48mm BMT COLORBOND® steel, ZINCALUME® steel or galvanised steel. Trimclad® can be custom cut to specified lengths and comes in the range of COLORBOND® steel colours.

• Suitable for roofing & walling

• Ideal for commercial & industrial applications

• Range of accessories

• Long spanning capability

• COLORBOND® steel colour range

Metroll Metlok 700®

Metlok 700® is a concealed fix roof & wall system that allows for thermal expansion and contraction of sheets making it ideal for long run applications. Manufactured from 0.42mm and 0.48mm BMT COLORBOND® and ZINCALUME® steels, Metlok 700® is suitable for use in commercial and industrial applications for roof pitches as low as 1 degree (1 in 50).

• Concealed fix system

• Designed for thermal expansion and contraction

• Ideal for long runs

• Suitable for commercial & industrial applications

• Roof pitch as low as 1 degree

Metroll Metrospan®

Metrospan® is a roll formed, custom length, high tensile steel, uniformly profiled roofing and wall sheeting material, manufactured from 0.35mm*, 0.42mm and 0.48mm BMT COLORBOND®, ZINCALUME® or galvanised steels.

Metrospan® is ideal roofing and wall cladding for commercial and industrial buildings, roofing for new homes, home extensions, carports, garages, patios, fencing, fascia and façade work.

• Suitable for roofing & walling

• COLORBOND® steel colour range

• High strength

• Impact resistant

• Long spanning capability

Metroll Metrib®

Metrib® can be used on interior or exterior walls, on straight or curved surfaces and with the flutes installed in a horizontal or vertical direction. Designed as a low rib, flute profile, Metrib® is suitable for many applications where flat sheets cannot be used, including sheds, portable buildings, bus shelters, internal wall linings, soffits and the inner curve of arches.

• Install on straight or curved surfaces

• Install horizontally or vertically

• Wide range of uses

• Low rib height

• Can be used in place of fibre cement or plasterboard

• Easy to install

Metroll Mini Corodek®

Mini Corodek® has the same traditional shape as Corodek® but has smaller ridges and a reduced ridge height.  The corrugations can be used in a vertical or horizontal direction. The longitudinal corrugations of the product provide substantial strength and rigidity along the length of the sheet while allowing for curving across its width. Mini Corodek® is not intended as a principal roofing material.Mini Corodek® offers a blend of sophisticated decorator styling with the practicality of COLORBOND® steel. Architects and designers can use Mini Corodek® as a platform for a variety of versatile, modern and artistic applications.  This profile can be applied to ceilings and soffit linings, feature walls, partitions, kitchen cupboards, screens, small awnings and other areas without foot traffic.